Search for more information
Defibrillation, cardioversion and pacing with a single therapy lead, eliminating the need for 3 separate leads
17.3 cm (H) x 26.2 cm (W) x 20.8 cm (D) 20.8 cm (H) x 26.2 cm (W) x 20.8 cm (D) (models with blood pressure configuration)
OneStep cables are compatible with OneStep electrodes
American ZOLL defibrillation pacing monitor M-Series (ZOLL) structure and composition The product consists of defibrillation pacing monitor mainframe, defibrillation handle (1001-0150-01 type), defibrillation pacing cable (MFC type), AAMI/IEC standard lead electrocardiography patient cable (1001-00310-12 type), rechargeable battery (PD4410 type) composition.
ZOLL defibrillation pacing monitor M-Series (ZOLL) scope of application :
The product is used to terminate the patient's tachycardia and ventricular fibrillation symptoms, can be semi-automatic external defibrillation, manual asynchronous defibrillation, synchronous cardioversion, non-invasive external pacing therapy for the patient, but also for the patient's electrocardiogram, pulse oximetry, non-invasive blood pressure, carbon dioxide at the end of expiration monitoring.
The product should be used by qualified medical personnel trained in the operation of the equipment and by personnel qualified in basic life support, advanced cardiac support, and defibrillation, either by a physician or under medical supervision.
Semi-automated external defibrillation therapy is used for suspected cardiac arrest in unresponsive, nonrespiratory, and pulseless patients 8 years of age and older. The heart rate analysis function is used for patients 8 years of age or older to automatically analyze the heart rate and perform subsequent therapy according to the results of the analysis (defibrillation recommended or not recommended). Manual asynchronous defibrillation therapy is used to treat ventricular fibrillation and nonperfused ventricular tachycardia in pulseless, unresponsive patients, and is indicated for patients aged greater than or equal to 29 days. Synchronized cardioversion is used to terminate atrial fibrillation in patients aged greater than or equal to 29 days. Noninvasive external pacing is used to treat patients with symptomatic bradycardia. It can also be used to help patients in cardiac arrest if used as an early tool, in patients aged greater than or equal to 29 days. Pulse oximetry monitoring can be used to monitor oxygen saturation and pulse rate in patients older than or equal to 29 days.
Non-invasive blood pressure monitoring allows non-invasive monitoring of arterial blood pressure in patients with an upper arm circumference greater than 21 centimeters and age greater than or equal to 12 years. End-expiratory carbon dioxide monitoring can be used in patients older than or equal to 29 days and provides respiratory rate values.
ZOLL Defibrillation Pacing Monitor M-Series Technical Parameters
Dimensions 17.3 cm (H) x 26.2 cm (W) x 20.8 cm (D)
20.8 cm (H) x 26.2 cm (W) x 20.8 cm (D) (models with blood pressure configuration)
Weight 11.5 lbs (5.23 kg) (with multifunction cable), 13.5 lbs (6.14 kg) (with defibrillation board)
Battery 5-cell maintenance-free lead-acid rechargeable battery, 2V/cell (series connection)
AC Power 100-120~ 50/60 Hz, 220-240 ~ 50Hz, 220VA
DC input 10-29 V, 130W
Equipment Classification Internal power supply equipment Class I according to IEC 601-1.
IEC 601-1 Class II internally powered equipment (DC input only).
Design Standards Meet or exceed UL 2601, AAMI DF-39, AAMI DF-2, and IEC 601-2-4, IEC 601-2-25, and IEC 601-2-27.
All patient connections are electrically isolated
Operating Temperature Range: 0 to 55C
NOTE: M-Series devices do not perform as specified in the specifications when stored above the storage temperature and immediately put into service.
Storage and Transportation Temperature: -20 to 65C
Humidity: 5 to 95% relative humidity, non-condensing
Vibration: Mil Std 810E, minimum integrity test
Shock: IEC 68-2-27, (50g 6mS half-sine stimulus wave)
ZOLL Defibrillation Pacing Monitors M-Series (USA) Operating Air Pressure: 594 to 1060 mBar
Material: IEC 529, IP24
Electromagnetic characteristics (EMC): CISPR 11 Class B radiation
Electromagnetic Radiation Resistance: AAMI DF-2: IEC1000-4-3 to 20V/m
Electrostatic discharge: AAMI DF-2 : IEC 1000-4-2
Conductive Sensitivity : IEC 1000-4-4, 1000-4-5, 1000-4-6
Pacing
Modality VVI on-demand; asynchronous (fixed frequency/when no ECG leads are available or ASYNC pacing mode is used)
Pulse type Square wave, constant current
Pulse waveform and width Square wave, 40 ms 2 ms
Pulse amplitude 0 to 140 mA 5% (or 5mA). On-screen digital display (2 mA per step increment).
Pacing rate 30 to 180 ppm 1.5%. (2 ppm step increments).
Output Protection Defibrillation Shock Resistant, Isolated Circuitry
Multi-Function Electrode (MFE) pads Specialized front/back pre-coated conductive paste ZOLL Multi-Function Electrodes, or StatPadz, packaged in pairs
ZOLL Defibrillation Pacing Monitor M-Series Defibrillation
Waveform Biphasic square wave
Energy 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 75, 100, 120, 150, 200 Joules (50 load), selectable on front panel or defibrillation handle
Charge time < 6 seconds with new fully charged batteries, extended charge time with undercharged batteries
Energy Display The screen displays the selected energy as well as the released energy
Messages: “200 J MAX BIPHASIC”, “BRIDGE TEST FAILED”, “BRIDGE SHORT”
Synchronized mode Synchronized defibrillation is performed while the patient's R wave is falling and the message “SYNC” is displayed on the screen. The message “SYNC” is displayed on the screen as well as on the printout
Charge Controls Control buttons on defibrillator front panel and defibrillation handle
Defibrillation handle Standard chest wall adult/pediatric defibrillation pads; slide off adult pads to use pediatric pads.
Multi-purpose electrode pads Specialized ZOLL multi-purpose electrode pads or Stat Padz electrode pads with pre-coated conductive paste on the front and back of the chest, packaged in pairs
Built-in defibrillation discharge simulator Provides charging and discharging tests for defibrillation while the defibrillation handle is in the handle compartment
Defibrillation Advice Tips Evaluation of electrode pad connections and ECG confirms the need for defibrillation.
Heart rates requiring shock: ventricular fibrillation amplitude > 100 V, QRS cluster wave widening, tachycardia 150 bpm or greater. Refer to the ECG Calculation Accuracy section on Sensitivity and Functional Completion.
Multi-function electrode pads 0 - 250 ohms 10% or 5 ohms
Configuration List
ZOLL M series Defibrillation Pacing Monitor Standard Configuration
Mainframe Includes
- ZOLL's patented low-energy intelligent biphasic square wave defibrillation technology
- 5.7-inch high brightness electroluminescent (EL) display
- Manual, automatic (AED), and synchronized defibrillation functions
Non-invasive external pacing
- Significant event marker and memory function
- Alarm function
- High resolution thermal printer
ZOLL Defibrillation Pacing Monitor M-Series accessories include.
- AC power cord (1 piece)
- Rechargeable SLA Battery (1 piece)
- Adult and pediatric integrated external defibrillation handle (1pc)
Defibrillation/pacing/monitoring multifunctional electrode pads (1 set)
- 3-lead ECG monitoring cable (1 set)
- ECG printing paper, 90mm x 30m (1 box)
