Search for more information
Width: 14.8 in/37.6 cm Depth: 13.7 in/34.6 cm Height: 7.5 in/19 cm Weight: 13.3 lbs/6.0 kg, including battery and full roll of paper
Type: LCD - TFT Color Liquid Crystal Display Size: 111.4 mm x 83.5 mm Resolution: 320 x 240 pixels Sweep Speed: 29 mm/s nominal (stationary trace; sweeping erase bar) Viewing Time: 4 seconds
ECG monitoring with display for multi-wave view Manual and AED operation modes Printable patient event summary Internal data storage in the HeartStart XL Refurbished, Accessories Included, 90 days Warranty
The Philips HeartStart XL defibrillator is a small, user-friendly monitor and defibrillator. Philips’ HeartStart XL reaches maximum power in only three seconds. With an array of AED possibilities, text messages, patient data storage, and voice directions, the Philips HeartStart XL is sure to fulfill all your defibrillation needs. Additional features of the HeartStart XL include:
ECG monitoring with display for multi-wave view
Manual and AED operation modes
Printable patient event summary
Internal data storage in the HeartStart XL
Dimensions:
Width: 14.8 in/37.6 cm
Depth: 13.7 in/34.6 cm
Height: 7.5 in/19 cm
Weight: 13.3 lbs/6.0 kg, including battery and full roll of paper
Display Screen:
Type: LCD - TFT Color Liquid Crystal Display
Size: 111.4 mm x 83.5 mm
Resolution: 320 x 240 pixels
Sweep Speed: 29 mm/s nominal (stationary trace; sweeping erase bar)
Viewing Time: 4 seconds
Battery:
Type: 2 Ah, 12V, rechargeable, Sealed Lead Acid
Weight: 1.4 lbs/0.65 kg
Charge Time: Approximately 14.5 hours to 100%. Approximately 3 hours to 90%, indicated by LED on front panel.
Capacity: 100 minutes ECG monitoring or 50 full-energy discharges or 75 minutes ECG monitoring while pacing (with a new, fully charged battery at room temperature, 25º C)
Battery Indicators: LOW BATTERY message appears on display when at least 10 minutes of monitoring time and 5 maximum energy discharges remain (with a new battery at room temperature, 25º C)
Stoarge: Should not be stored above 40ºC for extended periods of time
Charger Output: Unit can be operated using only AC Power, with no battery installed
Defibrillator:
Waveform: Biphasic Truncated Exponential. Waveform parameters adjusted as a function of patient impedance
Shock Delivery: Via multifunction defib electrode pads or paddles
Charge Time: Less than 3.5 seconds to 200 Joules with a new, fully charged M3516A SLA battery pack at 25ºC; Less than 15 seconds to 200 Joules when powered by AC with no battery installed
Patient Impedance Range: Minimum - 15 Ohm (internal defibrillation); 25 Ohm (external defibrillation); Maximum - 180 Ohm
SpO2 Pulse Oximetry:
Wavelength Range: 500 - 1000 nm
Resolution: 1%
ECG Monitoring:
Inputs: Single channel ECG may be viewed on display and printed. Pads ECG is obtained through 2 multifunction defibrillation electrode pads. Lead I, II, or III is obtained through the 3-lead ECG cable and separate monitoring electrodes. With a 5-lead cable, lead aVR, aVL, aVF, and any one of the V (1-6) leads can also be obtained.
Lead Fault: LEADS OFF message and dashed line appear on the display if an electrode or lead wire becomes disconnected.
Paddle Fault: NO PADDLES CONNECTED message and dashed line appear on the display if paddles become disconnected
Pad Fault: NO PADDLES CONNECTED message and dashed line appear on the display if paddles become disconnected
Heart Rate Display: Digital readout on display from 15 to 300 bpm, with an accuracy of ±10%.
Heart Rate Alarms: Configurable pairs of low and high heart rate alarm limits: 30 to 100, 60 to 140, 90 to 160 and 120 to 200 bpm.
ECG Size: 2.5, 5, 10, 20, 40 mm/mV
